Skip to content

Updates

The WattWächter Plus supports Over-the-Air (OTA) firmware updates. New versions are provided via the cloud update server and can be triggered in four ways:

  • Web interface — Update notification and trigger directly in the browser
  • Smartphone app — Update status and trigger in the app
  • Cloud Portal — Remote trigger, also for multiple devices at once
  • REST API — Programmatically via /api/v1/ota/check and /api/v1/ota/start

What changed in which version is listed in the release notes.

Update Flow

1. Update check    →  Cloud server is checked for a new version
2. Update start    →  Firmware download is initiated
3. Download        →  Firmware is downloaded (LED: magenta)
4. Flash           →  Firmware is written to flash memory
5. Verify          →  MD5 checksum is verified
6. Reboot          →  Device restarts with the new firmware
7. Health check    →  Device reports the new version

During the update

  • The LED switches to solid magenta during the OTA update
  • Do not disconnect power!
  • The device restarts automatically after the update

Troubleshooting

Problem Solution
Update check fails Check internet connection, verify DNS
Download aborts Check WiFi signal strength, try again
Device won't start after update Wait 30 seconds, then disconnect and reconnect USB-C
Version unchanged Check /api/v1/system/alive — possible fallback to previous version