Skip to content

Supported meters

This overview shows which meters are compatible with the WattWächter products.

  • WattWächter Plus: Supported meters are detected automatically – no configuration required.
  • WattWächter Tasmota: Requires a Tasmota script matching your meter. The links in the table take you directly to the corresponding script on the Meter Scripts page.
  • WattWächter USB: Passes the data on unchanged to your computer via USB and is therefore compatible with all meters with an optical interface. What is evaluated depends on your software, e.g. Home Assistant (EDL21, SML only), Volkszähler or ioBroker. See WattWächter USB.
  • WattWächter TTL: As a pure IR reading head, it is theoretically compatible with all meters with an optical interface. Data processing is handled by your own system – you need to write a suitable read-out script yourself. See WattWächter TTL.

Full data only after unlocking

Many meters only transmit a reduced data set without instantaneous power by default. To get the full data set, the meter must be unlocked with the PIN from your network operator – see Meter Preparation.

Electricity Meters

Manufacturer Model WattWächter Plus WattWächter Tasmota
Apator 12EC3 / 12EC3G ¹ ⁴ ✅ auto-detected, meter readings only Script
APOX+ ✅ auto-detected Script
Lepus 3.060 ✅ auto-detected Script
Norax 1D+ ✅ auto-detected Script
Norax 3D ✅ auto-detected Script
Norax 3D+ ✅ auto-detected Script
Picus ✅ auto-detected Script
Bauer BSM ⁴ ✅ auto-detected Script
Baylan BM ¹ ⁴ ✅ auto-detected, meter readings only Script
BT ¹ ⁴ ✅ auto-detected, power calculated ⁵ Script
Digimeto GS303 ✅ auto-detected Script
DZG DVS7410 ✅ auto-detected Script
DVS7412 ✅ auto-detected Script
DVS7420 ✅ auto-detected Script
DVS7612 ✅ auto-detected Script
DWSB10 ✅ auto-detected Script
DWZE12 ✅ auto-detected Script
DWS7410 ✅ auto-detected Script
DWS7412 ✅ auto-detected Script
DWS7420 ✅ auto-detected Script
DWS7612 ✅ auto-detected Script
DWSB06 ✅ auto-detected Script
DWSB12 ✅ auto-detected Script
DWSB20 ✅ auto-detected Script
DWSE20 ✅ auto-detected Script
WS7612 ✅ auto-detected Script
EasyMeter M24 ✅ auto-detected Script
M23 ✅ auto-detected Script
M60 ✅ auto-detected Script
M100 ✅ auto-detected Script
Q1A ✅ auto-detected Script
Q3A ✅ auto-detected Script
Q3B ✅ auto-detected Script
Q3C ✅ auto-detected Script
Q3D ✅ auto-detected Script
Q3M ✅ auto-detected Script
Q3S ✅ auto-detected Script
eBZ DD3 ... ODZ1 ✅ auto-detected Script
DD3 ... SMZ1 / DD3 ... SUZ1 ✅ auto-detected Script
MD3 ✅ auto-detected Script
WD3 ... SMZ1 ✅ auto-detected Script
Echelon 83332 ✅ auto-detected, Readonlykey required ³ only via openHAB in USB mode ³
EFR SGM C2 / C4 / C6 / C8 ✅ auto-detected Script
SGM D4 ✅ auto-detected Script
SGM-DD ✅ auto-detected Script
SGM-SM ✅ auto-detected Script
Elster AS1350 ⁴ ✅ auto-detected Script
AS1440 ⁴ ✅ auto-detected Script
AS1500 ¹ ⁴ ✅ auto-detected, meter readings only Script
AS2018 ⁴ ✅ auto-detected Script
AS2020 ✅ auto-detected Script
AS3500 ⁴ ✅ auto-detected Script
T510 ⁴ ✅ auto-detected Script
EMH eBZD ✅ auto-detected Script
DMTZ-XC ¹ ⁴ ✅ auto-detected, meter readings only Script
ED100L ✅ auto-detected Script
ED300L ✅ auto-detected Script
ED300S ✅ auto-detected Script
eHZ ✅ auto-detected Script
eHZB ✅ auto-detected Script
eHZM ✅ auto-detected Script
ITZ ⁴ ✅ auto-detected Script
mMe4.0 ✅ auto-detected Script
LZQJ-XC ¹ ⁴ ✅ auto-detected, meter readings only Script
Hager EHZ161 ✅ auto-detected Script
EHZ361 ✅ auto-detected Script
EHZ363 ✅ auto-detected Script
Hausheld HBZ100 ✅ auto-detected Script
3.HZ ✅ auto-detected Script
Holley DDZ285 ² ✅ auto-detected Script
DTZ541 ² ✅ auto-detected Script
EHZ541 ² ✅ auto-detected Script
Honeywell AS1350 ⁴ ✅ auto-detected Script
AS1440 ⁴ ✅ auto-detected Script
AS1500 ¹ ⁴ ✅ auto-detected, meter readings only Script
AS2018 ⁴ ✅ auto-detected Script
AS2020 ✅ auto-detected Script
AS3500 ⁴ ✅ auto-detected Script
Iskra AM550 ¹ ⁴ ✅ auto-detected, meter readings only Script
MT 171 ¹ ⁴ ✅ auto-detected, meter readings only Script
MT 173 ¹ ⁴ ✅ auto-detected, meter readings only Script
MT 174 ¹ ⁴ ✅ auto-detected, meter readings only Script
MT 175 ✅ auto-detected Script
MT 176 ✅ auto-detected Script
MT 371 ¹ ⁴ ✅ auto-detected, meter readings only Script
MT 372 ¹ ⁴ ✅ auto-detected, meter readings only Script
MT 382 ⁴ ✅ auto-detected Script
MT 631 ✅ auto-detected Script
eHZ MT 681-D4A51-K0p ✅ auto-detected Script
eHZ MT 681-D4A52-K0p ✅ auto-detected Script
MT 671 ¹ ✅ auto-detected, meter readings only Script
MT 681 ✅ auto-detected Script
MT 691 ✅ auto-detected Script
MT 880 ⁴ ✅ auto-detected Script
Itron ACE3000 Typ 260 ¹ ⁴ ✅ auto-detected, meter readings only Script
ACE6000 DC4.. ¹ ⁴ ✅ auto-detected, meter readings only Script
eHZ ✅ auto-detected Script
3.HZ ✅ auto-detected Script
EM 214 ⁴ ✅ auto-detected Script
HZ1 ✅ auto-detected Script
KAIFA MB310 ✅ auto-detected Script
Kamstrup 382 ¹ ⁴ ✅ auto-detected, meter readings only Script
Landis + Gyr E220 ✅ auto-detected Script
E230 ⁴ ✅ auto-detected Script
E320 ✅ auto-detected Script
E350 ⁴ ✅ auto-detected Script
E650 ⁴ ✅ auto-detected Script
ZMB120 ⁴ ✅ auto-detected Script
ZMD120 ¹ ⁴ ✅ auto-detected, meter readings only Script
Latronic L20 ✅ auto-detected Script
L30 ✅ auto-detected Script
Logarex LK11BE ² ✅ auto-detected Script
LK11BL ¹ ² ⁴ Script
LK13BD ¹ ² ⁴ ✅ auto-detected, meter readings only Script
LK13BE6067x9 ² ✅ auto-detected Script
LK13BE803... ² ✅ auto-detected Script
LK13BE ² ✅ auto-detected Script
LK13BO ¹ ² ⁴ ✅ auto-detected, meter readings only Script
LK33BM ✅ auto-detected Script
MetCom MCS301 ⁴ ✅ auto-detected Script
NES 83334 ✅ auto-detected, Readonlykey required ³ only via openHAB in USB mode ³
NZR ITZ-D ⁴ ✅ auto-detected Script
PAFAL 20EC3gr ¹ ⁴ ✅ auto-detected, meter readings only Script
Rayleigh / Hexing HEX12 ⁴ ✅ auto-detected Script
Sagemcom Smarty BZ-Plus ✅ auto-detected Script
Siemens TD-3511 ⁴ ✅ auto-detected Script
ZPA GH302 ✅ auto-detected Script
GH305 ✅ auto-detected Script
GS303 ✅ auto-detected Script
ZE311 ¹ ⁴ ✅ auto-detected, meter readings only Script
ZE314 ¹ ⁴ ✅ auto-detected, meter readings only Script

¹ The meter does not transmit instantaneous power via the optical interface, only meter readings (plus additional values depending on the model).

² Limited compatibility: some units have a weak IR transmit diode on the meter, which can make read-out unreliable.

³ NES/Echelon meters (ANSI C12.18) do not send on their own and only release their values after a logon with the Readonlykey from your metering point operator — there is no PIN entry on them. The WattWächter Plus supports them from firmware 1.2.1, see Reading NES Meters (ANSI C12.18).

⁴ The meter only sends after it has been asked to (protocol IEC 62056-21). On the WattWächter Plus and Tasmota, the firmware or script takes care of that. With the WattWächter USB your software has to send the request; vzlogger and ioBroker can do that, Home Assistant's EDL21 integration cannot. With the WattWächter TTL you need the yellow TX wire for it — see Python → Example script 2.

⁵ The meter does not send active power, but it does send voltage, current and power factor per phase. The WattWächter Plus calculates the power from these. Whether you are drawing or feeding in is derived from how the meter readings change.

Meter not listed?

If your meter does not appear here, contact WattWächter support – a matching script can often be added. Alternatively, the WattWächter USB or the WattWächter TTL lets you read any meter with an optical interface using your own software.