Readings¶
Which additional OBIS codes your meter provides depends on the manufacturer's or network operator's configuration and cannot be changed — even if the meter's display shows more values.
The following tables apply to electricity meters.
WattWächter Plus only
The WattWächter delivers all values it receives from the meter. You can check which ones are available in the web UI under Live Dashboard → All meter values or via the API at /api/v1/history/latest.
Notation on the WattWächter Plus: 1.8.1 instead of 1-0:1.8.1
The part before the colon (1-0: = electricity, channel 0) is always the same on electricity meters. The WattWächter Plus therefore leaves it out: 1-0:1.8.1 becomes 1.8.1 — in the live dashboard under All meter values, in the REST API, in the MQTT topics and in the Modbus status. Home Assistant discovery topics use underscores instead of dots (1_8_1).
Tariffs¶
| OBIS Code | Description | Unit |
|---|---|---|
1-0:1.8.1 |
Consumption tariff 1 | kWh |
1-0:1.8.2 |
Consumption tariff 2 | kWh |
1-0:1.8.3 |
Consumption tariff 3 | kWh |
1-0:1.8.4 |
Consumption tariff 4 | kWh |
1-0:2.8.1 |
Feed-in tariff 1 | kWh |
1-0:2.8.2 |
Feed-in tariff 2 | kWh |
1-0:2.8.3 |
Feed-in tariff 3 | kWh |
1-0:2.8.4 |
Feed-in tariff 4 | kWh |
Voltage, Current & Power¶
| OBIS Code | Description | Unit |
|---|---|---|
1-0:14.7.0 |
Frequency | Hz |
1-0:32.7.0 |
Voltage L1 | V |
1-0:52.7.0 |
Voltage L2 | V |
1-0:72.7.0 |
Voltage L3 | V |
1-0:31.7.0 |
Current L1 | A |
1-0:51.7.0 |
Current L2 | A |
1-0:71.7.0 |
Current L3 | A |
1-0:21.7.0 |
Power L1 | W |
1-0:41.7.0 |
Power L2 | W |
1-0:61.7.0 |
Power L3 | W |
Phase angles¶
| OBIS Code | Description |
|---|---|
1-0:81.7.1 |
Phase angle U L2/L1 |
1-0:81.7.2 |
Phase angle U L3/L1 |
1-0:81.7.4 |
Phase angle I/U L1 |
1-0:81.7.15 |
Phase angle I/U L2 |
1-0:81.7.26 |
Phase angle I/U L3 |
Device information¶
| OBIS Code | Description |
|---|---|
1-0:0.2.0 |
Firmware version |
1-0:0.9.1 |
Time |
1-0:96.50.1 |
Manufacturer code |
1-0:96.1.0 |
Meter number |