Meter scripts¶
The WattWächter Tasmota uses Tasmota scripts to read data from your electricity meter. Since different manufacturers configure their meters differently, a script matching your meter type is required. For a tabular overview of all supported meters, see Supported Meters.
Maximal scripts
The scripts are designed as maximal scripts – they contain all possible data points for a meter type. Unused lines can be removed as needed.
Prerequisites¶
For the WattWächter to receive all measurement data, the following settings must be configured on your meter:
- Request PIN activation from your grid operator
- In the meter menu: set PIN to
Off - In the meter menu: set Inf to
On
These settings enable extended data transmission via the IR interface. How to do this step by step is described under Meter preparation.
Setting Up a Script¶
- Open the WattWächter's web interface
- Navigate to Tools → Edit Script
- Enable Script enable
- Copy and paste the complete script for your meter type
- Click Save
Find Your Script¶
Type the manufacturer or model of your meter (e.g. "MT681" or "Itron") — or pick both from the lists below. The matching script appears right below:
Meter not listed?
If your meter type is not in the selection, contact WattWächter support.