Skip to content

Meter scripts

The WattWächter Tasmota uses Tasmota scripts to read data from your electricity meter. Since different manufacturers configure their meters differently, a script matching your meter type is required. For a tabular overview of all supported meters, see Supported Meters.

Maximal scripts

The scripts are designed as maximal scripts – they contain all possible data points for a meter type. Unused lines can be removed as needed.

Prerequisites

For the WattWächter to receive all measurement data, the following settings must be configured on your meter:

  • Request PIN activation from your grid operator
  • In the meter menu: set PIN to Off
  • In the meter menu: set Inf to On

These settings enable extended data transmission via the IR interface. How to do this step by step is described under Meter preparation.

Setting Up a Script

  1. Open the WattWächter's web interface
  2. Navigate to Tools → Edit Script
  3. Enable Script enable
  4. Copy and paste the complete script for your meter type
  5. Click Save

Find Your Script

Type the manufacturer or model of your meter (e.g. "MT681" or "Itron") — or pick both from the lists below. The matching script appears right below:

Meter not listed?

If your meter type is not in the selection, contact WattWächter support.